All Related Products
12” Roof Anchor Back Plate
Part Number: ANCHOR12BACKER
Back Plate for 12” Roof Anchor 1/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.
12” Roof Anchor Post
Part Number: ANCHOR12POST
12” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012
12” Roof Anchor w/Baseplate
Part Number: ANCHOR12PLATE
12” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
18” or 24” Roof Anchor Back Plate
Part Number: ANCHOR24BACKER
Back Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.
18” Roof Anchor Post
Part Number: ANCHOR18POST
18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
18” Roof Anchor w/Baseplate
Part Number: ANCHOR18PLATE
18” Roof Anchor w/Baseplate Galvanized Finish, 1/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
24” Roof Tieback Post
Part Number: ANCHOR24POST
24” Roof Tieback Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
24” Roof Tieback w/Baseplate
Part Number: ANCHOR24PLATE
24” Roof Tieback w/Baseplate Galvanized Finish, 5/8” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.
Parapet Anchor
Part Number: A00002
Parapet Anchor. Galvanized Steel. 2.36′′ – 14.17′′ parapet range. Min breaking strength 5000 lbs. Meets or exceeds ANSI Z359.1-2007.
2-Hole Anchor Plate with D-Ring
Part Number: ANCHORDRING
With a stainless-steel baseplate, the 2-Hole Anchor Plate with D-Ring can be secured to steel or concrete surfaces by bolting, welding, or using suitable fasteners. It is ideal for permanent installations and those exposed to the elements. The large D-ring is freely movable with gloved hands. Minimum breaking strength is 5000 lbs. Meets or Exceeds OSHA 1926 Subpart M, OSHA...
Anchor Roof Ridge Double
Part Number: A00152
Roof Ridge Anchor. Galvanized Steel with dual stamped D-rings. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
Anchor Roof Ridge Single
Part Number: A00151
Roof Ridge Anchor. Galvanized Steel with single stamped D-ring. Minimum breaking strength is 5000 lbs. Meets or Exceeds ANSI Z359.18-2017, A10.32-2012.
ANCHORSPEEDY
Part Number: ANCHORSPEEDY
The ANCHORSPEEDY by Palmer Safety is an anchorage connector that can be conveniently disposed of after use. It is specially designed to fit a range of wood roof pitches and meets all relevant OSHA regulations. Installing and removing the ANCHORSPEEDY is easy and hassle-free. Simply adjust it to fit over the roof ridge of your choice and use all the...
Large Ring Roof Anchor
Part Number: A00153
Galvanized steel roof anchor with stamped single large D-Ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017 & A10.32-2012.
Reusable Roof Anchor
Part Number: A00150
Reusable Roof Anchor. Galvanized Steel with stamped D-ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017.